top of page
F501SP in walnut finish,

fyne audio F501SP

With the addition of an extra bass driver and a full length cabinet, the F501SP adds to the depth and scale of the F500SP model.

fyne audio at the little audio company,
F501SP in natural walnut veneer

The F501SP is a two-and-a-half-way floorstanding loudspeaker incorporating a dual concentric array based on a 6" mid/bass driver and 25mm magnesium dome compression tweeter, producing a single point sound source.​ This "IsoFlare" design insures an even in-room dispersion, and avoids any potential inter-driver phase issues. A second bass shares the output from 250Hz and below, increasing overall output, and relieving some of the load from the main driver array, and reducing excursion of the mid/bass driver, in turn reducing distortion and contributing to a clearer midrange.

​

The BassTrax venting system ports downwards from the underside of the cabinet onto a specially shaped diffuser which is bolted to the bottom of the cabinet, releasing bass energy uniformly into the room.

​

Fyne Audio's FyneFlute roll surround dissipates unwanted energy from travelling back through the cone and causing colorations. 

​

The cabinet is available in gloss white or black, gloss walnut, and natural walnut veneer finishes.

F501SP in black with grille,
  • two-and-a-half-way design

  • downward ported design

  • dual-concentric design

  • 1x 1" magnesium dome compression tweeter

  • 1x 6" long-throw mid/bass driver

  • 1x 6" long throw bass driver

  • 8ohms nominal impedance

  • 91dB sensitivity

  • 1.7kHz and 250Hz crossover frequencies

  • 36Hz-34kHz response (+/-6dB)

  • gloss black, gloss white, gloss walnut, and natural walnut veneer finishes

  • H 984mm x W 288mm x D 320mm 

  • £4,369 / pair in gloss walnut

  • £3,499 / pair all other finishes

Home Cinema Choice Best Buy award,
bottom of page